No Cables, No Pulleys, No VSD Screw Drives, No Problems

ShoreMaster is a leader in Hydraulic Boat Lift Technology and has offered hydraulic boat lifts to the market for decades. Lake Area Docks & Lifts carries ShoreMaster's full line of TruLift Hydraulic Boat Lifts from ShoreMaster at each of our five Minnesota locations. The TruLift Hydraulic Boat Lift is available in 6,000lb., 8,000lb., 10,000lb., and 12,500lb. capacities to protect nearly any make or model of wakesurf or wakeboard boat on the market. If you are looking to upgrade your boat lift to a true cable-less, pulley-less, vsd screw drive-less model, the TruLift Hydraulic lift is the best option on the market, even if you are dealing with low, or shallow water where you store your wakesurf boat.

True Hydraulic Boat Lift Technology

Hydraulic Technology has been around for a very long time and it reliably powers machines and equipment in nearly every industry. ShoreMaster has created a boat lift that is designed to lift today's heavy wakeboard and wakesurf boats with ease, and less potential for problems due to the higher weights of these boats. The TruLift Hydraulic operates without any cables or pulleys - so there is no chance that you will need to repair or replace a cable or pulley over the lift of the lifts. The TruLift simply uses tried-and-true Hydraulic components - Hydraulic Pumps, Hydraulic Rams, Hydraulic Hoses, and the lift frame assembly to lift your boat out of the water. Other Hydraulic manufacturers use these same components on their hydraulic lift models, but needlessly complicate them with the addition of cables, pulleys, and / or screw drives. The TruLift Hydraulic Lift from ShoreMaster is the simplest way to lift your boat out of the water period. When the lift is in the up and over center position, your boat's weight is being supported by the TruLift frame, not the hydraulic components, or cables and pulleys. This means less stress on the boat lift and a longer, and less expensive service life. 

Will The TruLift Hydraulic Boat Lift work in Shallow Water?

Absolutely. The TruLift is designed to operate in very shallow water for a Hydraulic style boat lift. The TruLift requires just 16" of water plus the draft of your boat to be able operate and store your boat. The lay-flat design means you can get your wakeboard / wakesurf boat on and off of the boat lift in very shallow water. The TruLift also works well in deep water, with 48" and 60" of lift travel - the TruLift is simply the best boat lift you can buy for your boat. You'll get more sessions in without worrying about problems and maintenance to your boat lift. Plus, the TruLift Hydraulic lift is guaranteed to operate at 100% of full stated capacity. Some boat lift manufacturers don't warranty their hydraulic lifts to full capacity, but ShoreMaster does.

What About Performance How Fast Does the TruLift Operate?

The TruLift is designed to lift and operate at 1 inch per second. That's fast for any style of Hydraulic Boat lift. Remote control operation is standard on all TruLift Hydraulic Lifts. To maximize your boat's protection, and improve your boating experience, you can add performance and convenience options like Vertical PVC Guide-Ons, Canopy Frames, Canopy side and end Skirts, Solar Charging Panels for your control box, and control box holders / mounts. 

ShoreMaster TruLift Hydraulic Lift Capacities / Models

• 6,000LB TruLifts
• 8,000LB TruLifts
• 10,000LB TruLifts
• 12,500LB TruLifts

<

>

PRODUCT HIGHLIGHTS

• Dime-Welded Construction with Quiet, Smooth Operation
  
• Remote Control Operation Comes Standard
  
• Pure Hydraulic Design – no cables or pulleys
  
• Available in capacities of 6,000-12,500lbs; TruLift design in 8,000-12,500 capacities
  
• Bi-Rotational Pump, pressure-balanced for high efficiency
  
• 48” and 60” Lift Travel Available
  
• Rails and Bunks for V-Hulls, Sailboats, and Pontoons
  
• Traditional cantilever design works in deep water, shallow bays & fluctuating water

6,000LB TruLift Hydraulic Boat Lift Specifications

PRODUCT HIGHLIGHTS

• Dime-Welded Construction with Quiet, Smooth Operation
• Remote Control Operation Comes Standard
• Pure Hydraulic Design – no cables or pulleys
• Available in capacities of 6,000-12,500lbs; TruLift design in 8,000-12,500 capacities
• Bi-Rotational Pump, pressure-balanced for high efficiency
• 48” and 60” Lift Travel Available
• Rails and Bunks for V-Hulls, Sailboats, and Pontoons
• Traditional cantilever design works in deep water, shallow bays & fluctuating water

8,000LB TruLift Hydraulic Boat Lift Specifications

PRODUCT HIGHLIGHTS

• Dime-Welded Construction with Quiet, Smooth Operation
• Remote Control Operation Comes Standard
• Pure Hydraulic Design – no cables or pulleys
• Available in capacities of 6,000-12,500lbs; TruLift design in 8,000-12,500 capacities
• Bi-Rotational Pump, pressure-balanced for high efficiency
• 48” and 60” Lift Travel Available
• Rails and Bunks for V-Hulls, Sailboats, and Pontoons
• Traditional cantilever design works in deep water, shallow bays & fluctuating water

10,000LB TruLift Hydraulic Boat Lift Specifications

​PRODUCT HIGHLIGHTS

• Dime-Welded Construction with Quiet, Smooth Operation
• Remote Control Operation Comes Standard
• Pure Hydraulic Design – no cables or pulleys
• Available in capacities of 6,000-12,500lbs; TruLift design in 8,000-12,500 capacities
• Bi-Rotational Pump, pressure-balanced for high efficiency
• 48” and 60” Lift Travel Available
• Rails and Bunks for V-Hulls, Sailboats, and Pontoons
• Traditional cantilever design works in deep water, shallow bays & fluctuating water

12,500LB TruLift Hydraulic Boat Lift Specifications